Excel RTD

1. About the Excel RTD app

The Excel RTD app lets you do two things:


• Put real-time data into Excel using only Excel’s RTD() function. No macros; no
programming; no XLL add-ins
• Send simple trading commands from VBA code in Excel


You can run multiple copies of the Excel RTD app for different accounts, and then combine
the data for those accounts in a single spreadsheet.


The app is supplied with an example spreadsheet which lets you enter up to 5 account
numbers, and then automatically displays a dashboard of equity and balance etc; symbol
prices; and a consolidated list of open positions.

2 Displaying real-time data in Excel

2.1 Running the RTD app

In order to put real-time data into Excel you need to run the RTD app. The Excel formulas
listed below will give blank values if the app is not running.

2.1.1 Available symbols

Information about the following symbols will be available in the Excel RTD app:

MT4/5: the app will report all the symbols which are included in the MT4/5 market
watch
Tradable: the app will report all available symbols in the platform
All other platforms: you configure which symbols the app reports using the app’s
Symbols menu.

2.2 Excel formula

Once the RTD app is running, you can use the following formula in Excel to insert a realtime feed of account, ticket, or price data. You simply need to fill in the account number, and the “property” which you want to display:

=RTD("FXBlueLabs.ExcelRTD", , "account number", "property")

For example, if your account number is 156734 and you want to display the account’s balance, or the bid price of GBPUSD:

=RTD("FXBlueLabs.ExcelRTD", , "156734", "balance")
=RTD("FXBlueLabs.ExcelRTD", , "156734", "bidGBPUSD")

Please note: with some language settings – for example, Polish – Excel may want the sections of the formula to be separate by semi-colons instead of commas. For example:

=RTD("FXBlueLabs.ExcelRTD"; ; "account number"; "property")

2.3 Property names

The RTD app supplies data about the account (e.g. equity and balance), symbol prices, “tickets“, bar history, and technical indicator values. The list of tickets includes both open positions and pending orders.

2.3.1 Account data properties

Property

Meaning

currency

The deposit currency of the account

balance

Account balance

Equity

Account equity

Pl

Floating profit/loss

usedmargin

Margin in use

Freemargin

Free margin

tickets

Number of “tickets“: open positions and pending orders

2.3.2 Price and symbol data properties


The app supplies the current ask and bid prices for all symbols configured in the app. For example, if the symbol name you are interested in is EURUSD, then the property name for its ask price is askEURUSD. For example:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "askEURUSD")

 

Property

Meaning

bidSymbol

Bid price of symbol

askSymbol

Ask price of symbol

highSymbol

Daily high of the symbol. Not available on all platforms. The definition of the day’s start (e.g. GMT, or some other time zone)

lowSymbol

Daily low of the symbol. Not available on all platforms. The definition of the day’s start (e.g. GMT, or some other time zone) depends on the broker/platform.

 

The app also provides a count and a list of all configured symbols. For example, the following formulas return the number of available symbols and the name of the 5th symbol on the list (which can be in any order):

=RTD("FXBlueLabs.ExcelRTD", , "156734", "symbols") 

=RTD("FXBlueLabs.ExcelRTD", , "156734", "s5")

Property

Meaning

symbols

Number of symbols

sN

Name of the nth symbol, e.g. EURUSD. The N value is an index between 1 and the total number of symbols

 

2.3.3 Ticket data properties


The app supplies the following information about each "ticket", i.e. each open position and pending order. The N value in each property name is an index between 1 and the total number of tickets (reported by the tickets property).


For example, you can get the symbol name and net profit of the 2nd ticket (if there is one) using the following formulas:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "t2s")
=RTD("FXBlueLabs.ExcelRTD", , "156734", "t2npl")

Property

Meaning

tNt

Ticket number, i.e. the ID of the open position or pending order

tNa

Action: BUY, SELL, BUYLIMIT, SELLLIMIT, BUYSTOP, SELLSTOP

tNs

Symbol name

tNv

Volume

tNnpl

Net profit (gross profit + commission + swap). Not applicable on pending orders, and reported as zero.

tNpl

Gross profit. Not applicable on pending orders, and reported as zero.

tNswap

Swap. Not applicable on pending orders, and reported as zero.             

tNcomm

Commission. Not applicable on pending orders, and reported as zero.

tNsl

Stop-loss price

tNtp

Take-profit price

tNop

Open/entry price

tNcp

Current price of symbol

tNcm

Order comment

tNmg

Order magic number (MetaTrader 4 only)

tNot

Open time (as number of seconds since 1/1/1970)

2.3.4 Bar history


You can use the Excel RTD app to request recent price history from the platform. All values are bid prices. (Please note that this price history is not available on the tradable platform.)


The property name for bar history is as follows: @bh,symbol,timeframe,data,shift. For example, the following formula shows the high of the current EUR/USD H1 bar:


=RTD("FXBlueLabs.ExcelRTD", ,"156734", "@bh,EURUSD,H1,high,0")


2.3.4.1 Timeframe value


The bar timeframe can either be specified as a number of minutes – e.g. 60 for hourly bars – or you can use standard notations such as H1 or M3. The available timeframes are as follows:

Period

Timeframe value

M1

1

M2

2

M3

3

M4

4

M5

5

M6

6

M10

10

M12

12

M15

15

M30

30

H1

60

H2

120

H3

180

H4

240

H6

360

H8

480

D1

1440

D2

2880

W1

7200

 

2.3.4.2 Price data


You can request the following information about each bar:

Data

Meaning

time

Start time of the bar (in the format yyyy/mm/dd hh:mm:ss)

open

Open price

high

High price

low

Low price

close

Close price

range

Range from high to low

median

Average of high and low

typical

"Typical" price: average of high, low, and close

weighted

"Weighted" price: average of high, low, close, and close – i.e. double-weighting on the close value

change

Change in bar: close minus open, therefore negative for down bars and positive for up bars.

abschange

Absolute change value, i.e. change converted to a positive number if negative        

 

2.3.4.3 Bar shift


The final part of the price history formula is the bar "shift", i.e. which bar to get information about. Bars are numbered with the newest at zero, and increasing in order of age. In other words, bar 0 is the current in-progress bar; bar 1 is the last complete bar etc.
Therefore, the close price on bar 0 (for any timeframe) is the current bid price. In effect, the following two formulas are identical:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "bidGBPUSD")
=RTD("FXBlueLabs.ExcelRTD", , "156734", "@bh,GBPUSD,60,close,0")


The amount of data available on each timeframe depends on the underlying platform, but will typically be around 250 bars.


2.3.5 Technical indicators


The Excel RTD app has some built-in indicator calculations which you can request using formulas. For example, the following formula will show 14-bar Relative Strength Index for GBP/USD M5:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "@rsi,GBPUSD,M5,14,0")

 

Please note that the technical indicators are not available on the tradable platform.


The property name for a technical indicator starts with an indicator name such as @rsi or @ema, and is then followed by a list of parameters separated by commas.


The first two parameters for an indicator are always the symbol name and the timeframe, which can be specified either as H2 or as the equivalent number of minutes such as 120.


The last parameter is always the bar "shift". You will normally want to use a value of 0 for the shift, in order to get the current indicator value, but you can also use a shift of e.g. 1 to get the value of the indicator at the end of the previous bar. (The only exception are the swingpoint indicators, which always return the latest swing point and do not use a shift parameter.)


Many indicators can be applied to different data values from each bar, e.g. the high price or even the bar range instead of the close price.


Please bear in mind that exponential moving averages and similar calculations are affected by the amount of available bars. For convenience, everyone always refers to the N value in such calculations as "N bars" (e.g. "21-bar EMA"), but this is not what it truly means. The N is a weighting factor, and a calculation such as an EMA always looks at the entire bar history which it has collected, but giving increased weight to the most recent N bars. Two calculations of an EMA can be different – though only usually by small amounts – if they are using different amounts of bar history.


2.3.5.1 @sma – Simple Moving Average


You can calculate a simple moving average (i.e. arithmetic mean) using the @sma indicator.
For example, the following formula does an average of the median prices for the last 10 bars on GBP/USD M5:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "@sma,GBPUSD,M5,median,10,0")


The indicator’s parameters are as follows:

Parameter

Meaning

symbol

Symbol name, e.g. GBPUSD

timeframe

Bar timeframe, as a number of minutes or a notation such as H1 or M3

data

Data to use from each bar, e.g. close or high

period

Number of bars to calculate the average over   

shift

Bar shift, e.g. zero in order to get the current value of the indicator

 

2.3.5.2 @ema – Exponential Moving Average


You can calculate an exponential moving average using the @ema indicator. For example, the following formula does an average of the ranges of the last 21 bars on GBP/USD D1:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "@ema,GBPUSD,1440,range,21,0")


The indicator’s parameters are as follows:

Parameter

Meaning

symbol

Symbol name, e.g. GBPUSD

timeframe

Bar timeframe, as a number of minutes or a notation such as H1 or M3

data

Data to use from each bar, e.g. close or high

period

Number of bars to calculate the average over   

shift

Bar shift, e.g. zero in order to get the current value of the indicator

 

 2.3.5.4 @lwma – Linear-Weighted Moving Average

You can calculate a linear-weighted moving average using the @lwma indicator. For example, the following formula does an average of the ranges of the last 21 bars on GBP/USD D1:

=RTD("FXBlueLabs.ExcelRTD", , "156734", "@lwma,GBPUSD,1440,range,21,0")


The indicator’s parameters are as follows:

Parameter

Meaning

symbol

Symbol name, e.g. GBPUSD

timeframe

Bar timeframe, as a number of minutes or a notation such as H1 or M3

data

Data to use from each bar, e.g. close or high

period

Number of bars to calculate the average over   

shift

Bar shift, e.g. zero in order to get the current value of the indicator

 

2.3.5.5 @macd and @macdsig – MACD


You can calculate MACD (the difference between a "fast" EMA and a "slow" EMA) using the @macd indicator. You can also use @macdsig to get the smoothed "signal" value of the MACD indicator.


For example, the following formula calculates MACD for GBP/USD M30, using the standard 12-bar fast EMA and a 26-bar slow EMA, and applying the calculation to the high price of each bar:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "@macd,GBPUSD,30,high,12,26,9,0")


The indicator’s parameters are as follows:

Parameter

Meaning

symbol

Symbol name, e.g. GBPUSD

timeframe

Bar timeframe, as a number of minutes or a notation such as H1 or M3

data

Data to use from each bar, e.g. close or high

fast

Number of bars for the fast EMA

slow

Number of bars for the slow EMA

slowing

Smoothing period for the signal value

shift

Bar shift, e.g. zero in order to get the current value of the indicator

 

2.3.5.6 @atr – Average True Range


You can calculate average true range using the @atr indicator. For example, the following formula calculates the average true range of the last 21 bars on GBP/USD D1:

=RTD("FXBlueLabs.ExcelRTD", , "156734", "@atr,GBPUSD,D1,21,0")


The indicator’s parameters are as follows:

Parameter

Meaning

symbol

Symbol name, e.g. GBPUSD

timeframe

Bar timeframe, as a number of minutes or a notation such as H1 or M3

period

Number of bars to calculate the average over   

shift

Bar shift, e.g. zero in order to get the current value of the indicator

 

2.3.5.7 @rsi – Relative Strength Index


You can calculate Relative Strength Index using the @rsi indicator. For example, the following formula calculates 14-bar RSI on USD/JPY M3:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "@atr,USDJPY,3,14,0")


The indicator’s parameters are as follows:

Parameter

Meaning

symbol

Symbol name, e.g. GBPUSD

timeframe

Bar timeframe, as a number of minutes or a notation such as H1 or M3

period

Number of bars to calculate the average over   

shift

Bar shift, e.g. zero in order to get the current value of the indicator

 

2.3.5.8 @stoch and @stochslow – Stochastic Oscillator


You can calculate the stochastic oscillator using the @stoch indicator. You can also calculate the slowed "signal" value for the indicator using @stochslow.


For example, the following formula calculates the oscillator on GBP/USD H2 bars, using standard parameters of (5,3,3) – i.e. K period of 5, D period of 5, slowing value of 3.


=RTD("FXBlueLabs.ExcelRTD", , "156734", "@stoch,GBPUSD,120,5,3,3,0")


The indicator’s parameters are as follows:

Parameter

Meaning

symbol

Symbol name, e.g. GBPUSD

timeframe

Bar timeframe, as a number of minutes or a notation such as H1 or M3

k

K period for the calculation

d

D period for the calculation

slowing

Slowing period (moving average of D values)

shift

Bar shift, e.g. zero in order to get the current value of the indicator

 

2.3.5.9 @bbupper and @bblower – Bollinger bands


You can calculate "Bollinger" bands – a simple moving average plus/minus a number of standard deviations – using the @bbupper and @bblower indicators.


For example, the following formula calculates the upper band on GBP/USD M10, using an average of the close prices on the last 30 bars, and 2 standard deviations:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "@bbupper,GBPUSD,10,close,30,2,0")


The indicator’s parameters are as follows:

Parameter

Meaning

symbol

Symbol name, e.g. GBPUSD

timeframe

Bar timeframe, as a number of minutes or a notation such as H1 or M3

data

Data to use from each bar, e.g. close or high

period

Number of bars to calculate the average over   

deviations

Number of standard deviations to calculate (e.g. 2)

shift

Bar shift, e.g. zero in order to get the current value of the indicator

 

2.3.5.10 @vol – Volatility (standard deviation)


You can calculate volatility – i.e. 1 standard deviation – using the @vol indicator.


For example, the following formula calculates the volatility of the last 21 bar-ranges on GBP/USD M10:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "@vol,GBPUSD,10,range,21,0")


The indicator’s parameters are as follows:

Parameter

Meaning

symbol

Symbol name, e.g. GBPUSD

timeframe

Bar timeframe, as a number of minutes or a notation such as H1 or M3

data

Data to use from each bar, e.g. close or high

period

Number of bars to calculate the average over   

shift

Bar shift, e.g. zero in order to get the current value of the indicator

 

2.3.5.11 @cci – Commodity Channel Index


You can calculate the Commodity Channel Index using the @cci indicator.


For example, the following formula calculates CCI using the typical bar price for the last 14 bars on EUR/USD H1:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "@cci,EURUSD,60,typical,14,0")


The indicator’s parameters are as follows:

Parameter

Meaning

symbol

Symbol name, e.g. GBPUSD

timeframe

Bar timeframe, as a number of minutes or a notation such as H1 or M3

data

Data to use from each bar, e.g. close or high

period

Number of bars to calculate the average over   

shift

Bar shift, e.g. zero in order to get the current value of the indicator

 

2.3.5.12 @high – Highest bar value


You can calculate the highest of a series of bar values using the @high indicator. For example, the following formula calculates the highest high during the last 20 GBP/USD D1 bars:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "@high,GBPUSD,D1,high,20,0")


The indicator can be applied to any bar data. For example, you can find the highest low as well as the highest high. You can also use it to find the bar with the largest range or change.


The indicator’s parameters are as follows:

Parameter

Meaning

symbol

Symbol name, e.g. GBPUSD

timeframe

Bar timeframe, as a number of minutes or a notation such as H1 or M3

data

Data to use from each bar, e.g. close or high

period

Number of bars to calculate the average over   

shift

Bar shift, e.g. zero in order to get the current value of the indicator

 

2.3.5.13 @low – Lowest bar value


You can calculate the lowest of a series of bar values using the @low indicator. The indicator can be applied to any bar data. For example, you can find the lowest high as well as the lowest low. You can also use it to find the bar with the smallest range or change.


The following formula calculates the smallest D1 bar range during the last 20 GBP/USD D1 bars:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "@low,GBPUSD,D1,range,20,0")


The indicator’s parameters are as follows:

Parameter

Meaning

symbol

Symbol name, e.g. GBPUSD

timeframe

Bar timeframe, as a number of minutes or a notation such as H1 or M3

data

Data to use from each bar, e.g. close or high

period

Number of bars to calculate the average over   

shift

Bar shift, e.g. zero in order to get the current value of the indicator

 

2.3.5.14 @swingh and @swingl – Swing points ("fractals")


You can calculate the most recent swing points using the @swingh and @swingl indicators.A swing point is defined as a bar with lower highs either side of it (or higher lows, for @swingl). These swing points are similar to the MT4 "Fractals" indicator.


For example, the following formulas finds the most recent swing-high and swing-low prices on GBP/USD M5, using a 5-bar swing (2 bars either side of swing point) and not allowing an "unconfirmed" swing involving the current bar:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "@swingh,GBPUSD,M5,high,2,0")
=RTD("FXBlueLabs.ExcelRTD", , "156734", "@swingl,GBPUSD,M5,low,2,0")


The indicator’s parameters are as follows. Please note that the @swingh and @swingl do not have a bar "shift" parameter; they only return the most recent swing price.

Parameter

Meaning

symbol

Symbol name, e.g. GBPUSD

timeframe

Bar timeframe, as a number of minutes or a notation such as H1 or M3

data

Data to use from each bar. You normally use "high" with @swingh, and "low" with @swingl. However, you can use any value; for example, you can use "high" with @swingl to find a bar which has a lower high than the bars around it.

swingbars

Number of higher/lower bars required either side of the swing bar. The usual value is 2, for a five-bar swing consisting of two lower highs/higher lows either side of the swing bar, but you can use any value from 1 (i.e. three-bar swing) upwards

unconfirmed

Either 0 or 1. Zero ignores the current bar and only allows "confirmed" swings. 1 includes the current bar, and allows "unconfirmed" swings which can change depending on price movements during the current bar.

 

2.3.5.15 @keltupper and @keltlower – Keltner channels


You can calculate Keltner channels using the @kelternupper and @keltnerlower indicators. A Keltner channel is an exponential moving average plus/minus average true range.


For example, the following formula calculates the lower Keltner channel on GBP/USD H1, using a 20-bar EMA minus half of 10-bar ATR:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "@keltlower,GBPUSD,60,close,20,10,0.5,0")


Because Keltner channels are simply a combination of an EMA and ATR, the formula above is equivalent to the following:


=RTD("FXBlueLabs.ExcelRTD", , "156734", "@ema,GBPUSD,60,close,20,0") –
(RTD("FXBlueLabs.ExcelRTD", , "156734", "@atr,GBPUSD,60,10,0") * 0.5)


The indicator’s parameters are as follows:

Parameter

Meaning

symbol

Symbol name, e.g. GBPUSD

timeframe

Bar timeframe, as a number of minutes or a notation such as H1 or M3

data

Data to use from each bar, e.g. close or high, for calculating the EMA

emaPeriod

Number of bars to use for the EMA

atrPeriod

Number of bars to use for the ATR

atrMultiple

Multiples of ATR to add to/subtract from the EMA

shift

Bar shift, e.g. zero in order to get the current value of the indicator

 

2.3.6 Other properties


Other miscellaneous data items provided by the Excel RTD app are as follows:

Property

Meaning

LastUpdateTime

Time of the last update from the RTD app. Will report 1/1/2000 if the RTD app is not running for the account.

 

2.4 Symbol names and standardisation


By default the RTD app uses standardised symbol names. These may be different to the symbol names which your broker uses in your trading platform. For example, your broker’s symbol names may have a suffix such as cx or mn, e.g. EURUSDcx or EURUSDmn.


By default, all forex symbols are converted to the form AAABBB. For example, a name such as EURUSDnm or EUR/USD will be converted by default to EURUSD. You can turn off this standardisation by un-ticking the option "Use standardised symbol names" in the app. 


This setting is intended for spreadsheets where you are collecting data from multiple accounts on different brokers/platforms (by running multiple copies of the RTD app), and the brokers/platforms use different symbol names.


For example, you might have something like the following spreadsheet where there are account numbers in columns B onwards, and symbol names in rows 2 onwards. You can then have a formula which uses the symbol names in column A without having to adjust for one
account using EUR/USD and the other using EURUSDfx etc.

 

A

B

C

1

Symbol/Account

12376522

265823654

2

EURUSD

[see below]

 

3

GBPUSD

 

 

In cell B2: =RTD("FXBlueLabs.ExcelRTD", , B$1, CONCATENATE("bid", $A2))


You could then fill the formula from cell B2 into B3, C2 etc and the cell references would automatically adjust.


(The CONCATENATE function in Excel simply joins two pieces of together. In the above example it is joining the text "bid" with the symbol name in column A, to produce the property name bidEURUSD or bidGBPUSD.)

2.5 Ticket volumes


The RTD app reports the volumes on tickets as the nominal volume, not as a lot size. For example, a size of 0.20 lots will be reported as a volume of 20000.


(Unless you are using something like an MT4 mini account with a lot size of 10K instead of 100K, in which case 0.20 lots would be 2000 instead of 20000.)

3. Sending trading commands from Excel

The RTD app can also be used to send simple trading commands from VBA code in Excel.
You can also programmatically read the same data which is available via the RTD function.


The following features can in fact be used from any programming language which supports COM, not just from VBA in Excel.


3.1 Reading data in VBA code


You can read data programmatically using the FXBlueLabs.ExcelReader object. For example:


Set reader = CreateObject("FXBlueLabs.ExcelReader")
reader.Connect ("156734")
MsgBox reader.Read("balance")


In other words: you create an instance of the  XBlueLabs.ExcelReader object; you use the Connect() function to link it to a specific account number; and then you can use the Read() function to get data about the account.


The property names for the Read() function are the same as the property names for use with Excel’s RTD function.


3.1.1 Checking if a reader is successfully connected


You can successfully create the ExcelReader object and call the Connect() function even if no RTD app is currently running for that account.


In order to check whether data is actually available you can use Read() to make sure that properties such as balance are not blank, or you can read the LastUpdateTime property and check that the time is later than 1/1/2000.


3.1.2 Data consistency across multiple reads


If you are querying multiple pieces of data, particularly multiple pieces of ticket data, then you need to be careful about updates and data consistency. For example, consider the following code which loops through the ticket list:


For i = 1 To reader.Read("tickets")

strSymbol = reader.Read("t" & i & "s")
vVolume = reader.Read("t" & i & "v")
Next


It is possible for the following to happen:


• At outset there are 2 open tickets
• Between the two uses of Read(), i.e. between the execution of lines 2 and 3, one of the tickets is closed.
• Therefore, what used to be ticket 2 becomes ticket 1.
• As a result, at the end of the first loop, strSymbol will hold the symbol of the ticket which is now closed, and vVolume will hold the volume of the ticket which is still open.


To ensure consistency while reading multiple pieces of data, use Reader.ReaderLock(). This will suspend any changes to the data until you then use Reader.ReaderUnlock(). For example: 


Reader.ReaderLock()
For i = 1 To reader.Read("tickets")
strSymbol = reader.Read("t" & i & "s")
vVolume = reader.Read("t" & i & "v")
Next
Reader.ReaderUnlock()


Don’t forget to call ReaderUnlock() after using ReaderLock()…


3.2 Sending trading commands from Excel


As a security measure, commands are turned off by default. You must turn on the "Accept commands" setting in the RTD app in order to send commands successfully. If this option is turned off then all commands will return "ERR:Commands not allowed".


You can send simple commands from Excel using the FXBlueLabs.ExcelCommand object.
For example:


Set cmd = CreateObject("FXBlueLabs.ExcelCommand")
strResult = cmd.SendCommand("156734", "BUY", "s=EURUSD|v=10000", 5)


The SendCommand() function has four parameters:

• The account number (e.g. 156734)
• The command, e.g. BUY
• Parameters for the command, e.g. symbol and volume to buy
• The number of seconds to wait for a response


SendCommand() is synchronous. It returns either when the RTD app completes the command, or when the timeout period expires. (Timeout does not mean that the request such as a market order has been withdrawn/cancelled. It only means that the broker/platform has not responded within the acceptable time.)

The return value from SendCommand() is a string, beginning either with ERR: to indicate that an error occurred, or with OKAY:. The only exception to this is the TEST command, which returns the text HELLO.


3.2.1 Differences between trading platforms


There are some minor differences in the trading features which are currently supported on
different platforms:


• "Magic numbers" are only valid for MT4 and MT5, and these parameters will be
ignored on other platforms.
• Order comments are only available on some platforms.
• Stop-losses and take-profits are not currently supported on tradable


3.2.2 Commands and parameters


The parameters for a command are sent as a pipe-delimited string, consisting of a number of settings in the format name=value. The parameters can be listed in any order, and some parameters are optional.


cmd.SendCommand("156734", "BUY", "s=EURUSD|v=10000", 5)


Trading volumes are always specified as cash amounts, not as lot sizes. The format of symbol names depends on whether the "Use standardised symbol names" option is turned on in the RTD app.


3.2.2.1 TEST command


Simply returns the text HELLO if successful.

3.2.2.2 BUY and SELL commands


Submits buy or sell market orders. If successful, it returns the ID of the new ticket in the form OKAY:ticket-number

Parameter

Optional?

Meaning

s

Compulsory

Symbol name for the buy order

v

Compulsory

Trading volume

sl

Optional

Stop-loss price for the new position

tp

Optional

Take-profit price for the new position

comment

Optional

Comment for the new position

magic

Optional

Magic number for the new position

 

3.2.2.3 BUYLIMIT, SELLLIMIT, BUYSTOP, and SELLSTOP commands


Submits a new pending order. If successful, it returns the ID of the new ticket in the form OKAY:ticket-number

Parameter

Optional?

Meaning

s

Compulsory

Symbol name for the buy order

v

Compulsory

Trading volume

price

Compulsory

Entry price for the pending stop/limit order

Sl

Optional

Stop-loss price for the new position

tp

Optional

Take-profit price for the new position

comment

Optional

Comment for the new position

magic

Optional

Magic number for the new position

 

3.2.2.4 CLOSE command


Closes an open position or deletes a pending order. Returns OKAY:okay if successful.

Parameter

Optional?

Meaning

t

Compulsory

ID of the position to be closed, or the pending order to be deleted

 

3.2.2.5 PARTIALCLOSE command


Does a partial-close of an open position. Returns OKAY:okay if successful. Volumes larger than the position size are simply treated as a full close (not as a close plus a reverse for the remaining amount). Cannot be used on pending orders.

Parameter

Optional?

Meaning

t

Compulsory

ID of the position to be partially
closed.

v

Compulsory

Volume to be closed, e.g. 20000

 

3.2.2.6 REVERSE command


Reverses an open position, e.g. closing an open sell and replacing it with a buy. Returns OKAY:okay if successful.

Parameter

Optional?

Meaning

t

Compulsory

ID of the position to be reversed

v

Compulsory

Trading volume

sl

Optional

Stop-loss price for the new position

tp

Optional

Take-profit price for the new position

comment

Optional

Comment for the new position

magic

Optional

Magic number for the new position

 

3.2.2.7 CLOSESYMBOL command


Closes all open positions and pending orders for a specific symbol. Returns OKAY:okay if successful.

Parameter

Optional?

Meaning

s

Compulsory

Symbol name for the buy order

3.2.2.8 CLOSEALL command


Closes all open positions and pending orders for all symbols. Returns OKAY:okay if successful. Please note that closing everything can require a substantial timeout.

For example:


cmd.SendCommand("156734", "CLOSEALL", "", 20) ' 20-second timeout

3.2.2.9 ORDERSL command


Changes the stop-loss on an open trade or pending order. Returns OKAY:okay if successful.

Parameter

Optional?

Meaning

t

Compulsory

ID of the trade or pending order to be modified

tp

Compulsory

New take-profit price, or 0 to remove any existing take-profit

 

3.2.2.11 ORDERMODIFY command


Changes both the stop-loss and take-profit on an open trade or pending order. For pending orders, you can also alter the entry price.

Parameter

Optional?

Meaning

t

Compulsory

ID of the trade or pending order to be modified

p

Compulsory for pending orders

For pending orders, the new entry price for the order. Ignored and not required on open trades.

sl

Compulsory

New stop-loss price, or 0 to remove any existing stop-loss

tp

Compulsory

New take-profit price, or 0 to remove any existing take-profit

 

3.2.3 Standard error messages

Property

Meaning

ERR:Need account

Account value for SendCommand() is blank

ERR:Need command

Command value for SendCommand() is blank

ERR:No listening app

Cannot find an running instance of the RTD app for the specified account

ERR:No response within timeout

No response from the broker/platform within the specified number of seconds

ERR:Commands not allowed

The "Allow commands" option is not turned on in the RTD app

ERR:Unrecognised command

The command value for SendCommand() is not understood by the RTD app

ERR:Missing parameters

The command was missing one or more compulsory parameters

 

3.3 Asynchronous commands


It is also possible to send commands asynchronously rather than blocking execution of the VBA code until the command completes or times out. This works as follows:


• You use SendCommandAsync() instead of SendCommand().
• You periodically check the result of the asynchronous action using
CheckAsyncResult().
• When finished (or when you have decided to give up) you free up the command
memory using FreeAsyncCommand()


For example:


Set cmd = CreateObject("FXBlueLabs.ExcelCommand")
lCommandId = cmd.SendCommandAsync("10915", "BUY", "s=EURUSD|v=10000",
60)
strResult = ""
While strResult = ""
strResult = cmd.CheckAsyncResult(lCommandId)
If strResult = "" Then MsgBox "Still waiting..."
Wend

cmd.FreeAsyncCommand (lCommandId) 

SendCommandAsync uses the same four parameters as SendCommand(), but returns a "command ID" for subsequent use with CheckAsyncResult() and FreeAsyncCommand(), instead of returning the command result. Please note that SendCommandAsync() still has a
timeout value.


You must eventually call FreeAsyncCommand() after SendCommandAsync(), or else your code will leak memory, albeit in small amounts.


CheckAsyncResult() either returns a blank string if the command is still executing and has not reached its specified timeout or, if complete, it returns the same string response as SendCommand().

Zacznij handel
w kilka minut

bullet Uzyskaj dostęp +10.000 instrumentów finansowych
bullet Automatycznie otwieraj i zamykaj pozycje
bullet Aktualności i kalendarz ekonomiczny
bullet Wskaźniki techniczne i wykresy
bullet I wiele innych narzędzi

Podając swój adres e-mail, wyrażasz zgodę na politykę prywatności FP Markets i otrzymujesz przyszłe materiały marketingowe od FP Markets. W każdej chwili możesz zrezygnować z subskrypcji.




Source - database | Page ID - 23819

Get instant Updates in Telegram